Section 1:
Installation Requirements
Version 1.0
2
Intuicom, Inc.
Overview
The Hemisphere Outback A220/A320 smart antenna is typically configured to accept CMR or
RTCM format RTK corrections from an Intuicom RTK Bridge
®
-X which in turn has been
configured to connect to a GPS/GNSS reference network. The intended audience for this
document is a dealer or integrator familiar with the Hemisphere A220/A320 and general
familiarity with the Intuicom RTK Bridge–X. The Intuicom RTK Bridge–X User Guide covers
the steps necessary for its configuration.
1 Requirements for Installation
1.1 Required Information
In order to operate an Intuicom RTK Bridge–X, you are required to have the necessary
information to access and log in to the Real-Time Network. This information is entered
into the RTK Bridge–X and stored in a profile. More details on setting up an RTK
Bridge–X is available in the RTK Bridge-X manual.
•
IP address,
•
TCP port,
•
NTRIP mountpoint name,
•
username and password for access to the real-time GPS/GNSS network
1.2 Required Equipment
1.2.1 Intuicom Equipment and Accessories
1.
Intuicom RTK Bridge–X with activated data provider account (Verizon, AT&T, etc…)
2.
Intuicom RTK Bridge–X to DB-9 data/power cable:
[P/N: XRTKCAB-EZ]
3.
Null Modem Adaptor (M-M)
4.
Intuicom RTK Bridge–X Cellular/GPS antenna/cable:
[P/N: FIP4-MMDM-MM (magnetic mount)]
1.2.2 Other Equipment and Accessories
1.
PC with serial port and Hemisphere software (SLXMon and Remote Control) or Outback
S3 for configuration.
2.
Hemisphere Outback A220/A320
3.
A220/A320 cable(Hemisphere 051-0236)
