Section
2
:
Installation Instructions
Version 1.0
4
Intuicom, Inc.
•
Using the Intuicom RTK Bridge-X to A220/A320 data/power cable and the null
modem adapter, connect the RTK Bridge-X serial port to the Serial 2 (B Port) on the
A220/A320.
•
Connect the SAE power connector to the supplied DC power adapter which is
connected to Battery power.
•
The RTK Bridge-X should be configured to receive the GPS position from the data
port. In the Profiles page, in the profile that is to be used, under GPS Source, select
Serial. The RTK Bridge-X is now ready to receive the GPS position from the
A220/320.
•
Connect setup data/power cabling to the A220/A320 Serial 1 (A Port) and a serial
port on a PC running Hemisphere’s Remote Control software. Apply power and
connect to the A220/A320 with Remote Control.
•
Use the up and down arrows to navigate through the program menus. From the initial
screen, Scroll to GPS and select using the Enter on the keyboard.
