SECTION 2—OPERATION
IVC
™
Bed Series
14
Part No 1114836
Raising and Lowering the Head and Foot Sections
NOTE: For this procedure, refer to Detail “A” of FIGURE 2.1.
1. To raise the head of the bed, press the "Head Up" button.
2. To lower the head of the bed, press the "Head Down" button.
3. To raise the foot of the bed, press the "Foot Up" button.
4. To lower the foot of the bed, press the "Foot Down" button.
FIGURE 2.1
Operating Full Electric Bed - Models 5410IVC and 5411IVC
Operating the Semi-Electric Bed - Models 5310IVC and
5311IVC
NOTE: For this procedure, refer to FIGURE 2.2.
1. Perform one of the following:
• Use a four function pendant for head and foot spring functions.
• Use a hand crank for Hi/Lo bed operation.
2. Test all operating features of the bed.
3. If any problems arise during test, recheck all electrical connections and mechanical
hook ups.
NOTE: All semi-electric beds come with an emergency crank to allow continued operation in the
event of a power outage.
CAUTION
If a button on the pendant does not release or sticks, the bed spring will not stop
moving.
NOTE: Link Fabric
not shown.
Bed Down
Button
Bed Up
Button
DETAIL “A” - PENDANT CONTROLS
Head Down
Button
Head Up
Button
Foot Down
Button
Foot Up
Button
Head Section
Foot Section
