Invacare 65550, Assembly, Installation And Operating Instructions

For more information regarding Invacare products, parts, and services, please visit www.invacare.com

Part No 1163185

1

Rollator

Rollator

Model 65550

SAVE THESE INSTRUCTIONS

DEALER:

These

instructions

MUST

be

given

to

the

user

of

this

product.

NOTE:

Check

ALL

parts

for

shipping

damage.

If

shipping

damage

is

noted,

DO

NOT

use.

Contact

carrier/dealer

for

further

instruction.

WARNING

• DO NOT use this product or any available optional equipment without first completely reading and understanding these 

instructions and any additional instructional material such as owner’s manuals, service manuals or instruction sheets supplied 

with this product or optional equipment. If you are unable to understand the warnings, cautions or instructions, contact a 

healthcare professional, dealer or technical personnel before attempting to use this equipment - otherwise, injury or damage 

may occur.

• Each individual should ALWAYS consult with their physician or therapist to determine proper adjustment and usage.

• The Rollator is designed to provide support, increased stability and assistance to the end user while walking. The Rollator is 

NOT designed to support the total weight of an individual and has a weight limitation of 285 lbs (130 kg). 

• The Rollator can provide ambulatory assistance for an individual weighing up to 285 lbs (130 kg), including the weight of the 

contents of the basket and tray. The seat can support an individual weighing up to 285 lbs (130 kg).

• DO NOT use the rollator as a wheelchair or transport device. The Rollator is NOT intended for propelling while seated.

• The brakes MUST be locked before using the seat. When using the rollator in a stationary standing position, the hand brakes 

MUST be locked.

• DO NOT use the rollator on an escalator.

• A physical/occupational therapist should assist in the height adjustment for maximum support and correct brake activation.

• Care should be taken to ensure that all hand and height adjustments are secure, and that casters and moving objects are in good 

working order before using this or any mobility aid.

• All casters MUST be in contact with the floor at all times during use. This will ensure the rollator is properly balanced.

• ALWAYS observe the weight limit on the labeling of your product. Check that all labels are present and legible. Replace if 

necessary.

• The basket, tray and shelf have a weight limitation of 11 lbs (5 kg). Items placed in or on the basket, tray or shelf should NOT 

protrude from the basket, tray or shelf.

• If push handles are exposed to extreme temperature (above 100°F or below 32°F), high humidity and/or becomes wet, prior to 

use, ensure hand grips DO NOT twist on rollator handle - otherwise damage or injury may occur.

• After installation and before use, ensure that all attaching hardware is tightened securely.

• DO NOT hang anything from the frame of the rollator. Items should be placed in the basket or on the tray.

ACCESSORIES WARNING

• Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories 

designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.

Assembling the Rollator

NOTE:

For

this

procedure,

refer

to

FIGURE 1.

1.

Remove

plastic

caps

from

the

side

frame

tubes.

2.

Unfold

the

rollator.

NOTE:

Make

sure

that

the

red

locking

mechanism

fully

engages.

An

audible

“click”

will

be

heard.

NOTE:

The

locking

lever

and

washer

are

installed

on

the

outside

of

the

frame

tubes.

3.

From

the

inside

of

the

frame,

put

a

bolt

through

the

locking

lever

mounting

holes.

4.

Put

a

washer

onto

the

bolt.

5.

Thread

the

locking

lever

onto

the

bolt.

DO

NOT

tighten

the

locking

lever.

6.

Repeat

STEPS

3

‐

5

to

install

the

opposite

locking

lever.

7.

On

both

sides

of

the

rollator,

insert

and

adjust

the

handle

to

the

appropriate

height.

Tighten

the

locking

lever

onto

the

bolt.

WARNING

The handles MUST NOT be angled outside the marked 

position as this reduces the rollators lateral stability. Refer to 

Detail “B”.

Removing the Handles

1.

On

each

side

of

the

rollator,

loosen

but

DO

NOT

remove

the

locking

lever.

2.

Remove

the

handles

from

the

frame

tubes.

Adjusting Handle Height

1.

On

both

sides

of

the

rollator,

loosen,

but

DO

NOT

remove,

the

locking

levers.

2.

Adjust

each

handle

to

the

appropriate

height

and

tighten

the

locking

lever.

Make

sure

both

handles

are

adjusted

to

the

same

height.

FIGURE 1   

Assembling the Rollator

Assembly, Installation and Operating Instructions

DETAIL “A”

Locking 

lever

Bolt

Locking Lever 

Mounting Hole

Handle

Frame Tube

Incorrect

Correct

DETAIL “B”