Aquatec® Marine
1.
Place the seat
B
on the bottom of the empty bathtub.
Ensure that the spindle foot retainer
C
is pointing
towards the end of the bathtub opposite the drain
A
.
2.
Fold the side flaps of the seat outwards.
3.
Place the backrest
A
(without the battery) onto the
seat so that the hooks
B
of the backrest fit into the
hinges
C
of the seat plate
D
.
IMPORTANT!
Risk of damage!
Damage to the product caused by the spindle
foot slipping out.
– Ensure that the spindle is fully retracted and
the spindle foot is level and not twisted, before
folding up the backrest.
– Once the backrest is folded up, ensure that the
spindle foot is in the spindle foot retainer.
12
