4.
Hold the backrest at the center of the head end and
carefully lift it into the end position.
5.
Hold the charged battery
B
by the grip
A
and insert
it into the guide
C
of the backrest from above.
6.
Push the battery completely down.
The battery should click into place.
The bath lift is now ready for use.
IMPORTANT!
Risk of damage
– Make sure that the backrest does not touch
the bath tub edge.
– Place the bath lift further forwards in the bath
tub, if necessary.
3.4 Charging the battery
The bath lift cannot be used when the battery is charging.
WARNING!
Risk of electric shock
– Only recharge the battery in dry rooms at room
temperature (15 °C to 25 °C) and never in the
bathroom.
IMPORTANT!
– Only use the supplied charger to charge the
battery.
– Make sure that the voltage specifications
shown on the charger correspond to those of
the mains supply.
– Only connect the charger to mains supply when
the battery is connected to the charger.
D
A
F
C
E
1.
Insert the jack plug
A
of the charger
E
into the jack
socket
F
of the battery
D
until it engages.
2.
Insert the mains plug
C
of the charger into a power
socket.
13
