3 0
SECTION 10—PERIODIC MAINTENANCE GUIDELINES
Inspect/Adjust Weekly
Wheelchair rolls straight (no excessive drag or pull to one side).
Quick-release axles lock properly (see page 27).
Inspect for broken spokes. Adjustment/replacement.
Wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.
Inspect tires/castors for flat spots and wear.
Check pneumatic tires for proper inflation (recommended tire pressure is listed on the side wall of the tire).
Ensure castors are free of debris.
Inspect/Adjust Monthly
Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that
attaches strap to frame is secure and undamaged. Replace if necessary.
Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
Wheel bearings are clean and free of moisture.
Wheel brakes do not interfere with tires when rolling.
Wheel brake pivot point are free of wear and looseness.
Ensure all castor/wheel/fork/head tube fasteners are secure (see pages 6 & 33).
Ensure all hardware is tight (see page 6).
Ensure hand grips are secure to backrest canes.
Ensure castors are free of debris.
Inspect/Adjust every twelve months (1)
Wheelchair rolls straight (no excessive drag or pull to one side).
Arms are secure but easy to release and locking systems engage properly.
Adjustable height arms operate and lock securely.
Armrest armpad sits flush against arm tube.
All fasteners on clothing guards are secure.
Seat and/or back upholstery have no rips.
Inspect the backrest attaching hardware and mechanisms are securely tightened.
No excessive side movement or binding when rear wheels are lifted and spun.
Inspect handrims for signs of rough edges or peeling finish.
Inspect side frame and cross brace for signs of cracks, flaked paint or deformed metal work.
Inspect tires/castors for flat spots and wear.
Check pneumatic tires for proper inflation (recommended tire pressure is listed on
the side wall of the tire).
