SECTION 3—ARMRESTS
Ac t i on ² Ba s i c
1 5
Installing Swing Away Armrest
1. If necessary, remove existing armrest assembly as describe above
.
2. Install new/existing armrest assembly, first into the rear pivot socket and
into the front arm socket.
3. Lock new/existing armrest assembly by operate the push pin
.
Make sure that the dog point is properly engaged in its housing.
4. Repeat STEPS 1
-
3 for opposite side, if necessary.
FIGURE 3.2
Removing/Installing Swing Away Armrest
Rear pivot
socket
Dog point
Push pin
