SECTION 1— MAINTENANCE GUIDELINES & STABILITY WARNING
6
Inspect/Adjust every six months (Repairer or Dealer)
Wheelchair rolls straight (no excessive drag or pull to one side).
No excessive side movement or binding when rear wheels are lifted and spun.
Arms are secure but easy to release and locking systems engage properly.
Adjustable height arms operate and lock securely.
Armrest armpad sits flush against arm tube.
All fasteners on clothing guards are secure.
Seat and/or back upholstery have no rips.
Inspect adjustable angle back attaching hardware is securely tightened.
Inspect handrims for signs of rough edges or peeling finish.
Inspect tyres/castors for flat spots and wear.
Check pneumatic tyres for proper inflation (recommended tyre pressure is listed on
the side wall of the tyre).
Wheel brake pivot point are free of wear and looseness.
Adjust wheel brakes as tyres wear.
Wheel brakes are easy to engage.
Clean upholstery and armrests.
Sealed bearings and axle nut tension are correct.
Wheel/fork assembly has proper tension when castor is spun.
Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
Wheel bearings are clean and free of moisture.
Quick-release axles lock properly (see page 13).
Ensure axles are free from dirt, lint, etc.
Clean quick-release axles with a Teflon lubricant.
Ensure roller bearings are free from dirt, lint, etc.
Inspect for broken spokes.
Clean and wax all parts.
Ensure castors are free of debris.
Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware
that attaches strap to frame is secure and undamaged. Replace if necessary.
Wheel brakes do not interfere with tyres when rolling.
Ensure all castor/wheel/fork/head tube fasteners are secure (see pages 7,28,29).
Ensure all hardware is tight (see page 7).
Ensure hand grips are secure to backrest canes.
C A U T I O N
It is compulsary to use original Invacare spare parts which you can obtain from any
Invacare authorized dealer. A list of spare parts is available at www.invacare.eu.com
