Invacare® Action 4 NG
Rear fitting
1.
Position armrest support
C
over rear armrest bracket
D
.
2.
Push the armrest down until a clear “click” is heard
when it’s locked into the armrest bracket
D
.
3.7.5 Armrest, height adjustable, foldable and removable
Folding
1.
Grip the armrest by the armpad or by the front curve
and fold it back.
Front removing
1.
Press and hold the armrest release bracket
A
at the
front.
2.
Remove armrest from armrest socket by pulling straight
up and fold it back.
Front fitting
1.
Push the armrest down and until the front release
button
B
snaps into its armrest socket hole.
2.
Ensure button protrudes fully through socket hole.
Rear removing
1.
Remove armrest from armrest bracket
D
by pulling
straight up on the armrest.
Rear fitting
1.
Position armrest support
C
over rear armrest bracket
D
.
2.
Push the armrest down until a clear “click” is heard
when it’s locked into the armrest bracket
D
.
Adjusting the height
1.
After loosening the fixing screw
E
with 5 mm Allen key
or alternatively the thumbscrew, if present.
2.
Adjust the height and tighten the fixing screw
E
(5
Nm) or firmly tighten the thumbscrew, into the desired
position.
3.
Perform the setting on both sides.
3.8 Leg rests
WARNING!
Risk of injury
– Never lift the wheelchair by the footrest
supports or leg rests.
24
1608637-E
Summary of Contents for Action 4 NG Heavy Duty
Page 75: ...Notes...
