20
21
The armrests with central fixation (n°1 & n°4) from now on
are equipped with a support adjustable (in 2 parts) which ena-
bles you to reduce the plays and to facilitate the vertical tube
extraction, it is necessary to tighten or loosen the 4 screws
(B) according to the anticipated result (photo 15).
- Swing-away, removable n°2 (photos 16 & 17)
This range of armrests can be swung away to facilitate
transfers and disassembling during transport.
To swing the armrest away, push down the dog point (A),
reverse the procedure to reinsert making sure that the dog
point (B) is properly engaged in its housing.
To remove the armrest, swing it back completely and pull it up.
Reverse the procedure to reinstall.
The new design includes handle (C) and hollowed skirt-guard
(D) to facilitate front transfer.
Grip firmly the armrest handle, take care of your nails on the
skirt-guard edges.
Push on your arms to easily lift yourself up and the attendant
can help you to finalise the transfer to the place where you
wish to sit.
In the event the armrest handle covers (C) become slippery,
it is recommended to request your dealer to replace them.
!
Refer to paragraph 1.2.2.
Front transfert
for safety
instructions. When folding back down, ensure that it locks in
place, otherwise it can act as a long lever and could fatigue.
Note :
the armrests are mounted in pairs on the wheelchair;
whenever you remove them, remember that you have a right
and a left side !
!
Never lift the wheelchair by the armrests !
Keep your fingers away from movable parts during folding,
disassembling or adjustment to prevent injuries !
2.1.6. Comfort version
The Action
4
Comfort version (wheelchair for passive user) is
not designed or tested to be used as a seat in a vehicle (not
crash tested) it is necessary to use a vehicle seat adapted to
yout transportation.
The Action
4
Comfort version is always delivery in passive
position (rear wheel support plate) for a better stability.
16
C
D
A
17
B
1
18
