EN18
EN19
2
A
3
Make sure that the seat is properly positioned on the
2 seat rails to provide safety and comfort for the user.
Keep your fingers away from movable parts to prevent
injuries during folding and unfolding !
2.1.2 Type of backrests
- Fixed backrests :
This backrest do not require adjustment (photo 2)
Make sure push handles are locked fast before use.
- Folding backrest (photo 3) 43 cm backrest height.
• To save space when transporting folded and unoccupied,
operate lever (A) by pulling it and fold the top of the
backrest. To return to the initial position, bring the top in
the vertical position; it locks automatically.
The intended use of reclining backrest is to get a relaxing,
comfort position for the user. It is not indented to be used
in a dynamic situation and it should be used on horizontal
surface when the backrest is reclined (especially when the
backrest angle is more than 10°). Anti-tippers are recommen-
ded for those who need to feel safer or have a specific usage.
Simultaneously pull the levers (A) to provides the same angle
on both sides, release the levers when you reach the desired
angle.(Photo 4)
Mechanical version
There are 4 angles position by step of 10°.
Note :
Push on the backrest canes before operating the levers,
this is to release the auto-locked security system. (Photo 6).
It is recommended that this operation be performed
only by the attendant. Always make sure that the backrest is
locked in place to ensure perfect safety for the user.
Keep away fingers from moving parts (levers, cylinders,
mechanisms, etc.) to prevent injuries !
4
A
5
Summary of Contents for Action I NG
Page 2: ......
