16
17
2.1.3 Backrests type
Note :
Dismounting backrest: it can be removed for trans-
portation or to change the type, unscrew both buttons (A)
until you can pull up the backrest canes, reverse the proce-
dure to reinstall.
Make sure that the backrest cane preset hole and the button
thread hole are well aligned and firmly tighten the buttons
until their complete locked position.
!
To prevent falls or possible injury to the user and/or
attendant as the backrest canes are used as a support to tilt
and/or climb kerb or stairways, make sure that the backrest
canes are severally tied up to the frame.
- Fixed backrest of 10° (photos 1 and 1A)
Those backrest do not require adjustments.
- Folding backrest (photos 2 and 2A)
To save space during transport, operate lever (A) by pulling or
pushing it and fold the top of the backrest.
To return to the initial position, bring the top in the vertical
position; it locks automatically.
!
Always make sure that the backrest is properly locked
in place before the user settles down in the wheelchair to
prevent any injuries !
- Reclining backrest 0° to 30°(photos 3 and 3A)
Angle can be adjusted very easily which provides a comforta-
ble rest position, there are 4 angles position by step of 10°.
Simultaneously pull the levers (A) to provides the same angle
on both sides, release the levers when you reach the desired
angle.(photos 3-3A)
Note :
Push on the backrest canes before operating the
levers, this is to release the auto-locked security system.
!
It is recommended that this operation be performed
only by the attendant. Always make sure that the backrest is
locked in place to ensure perfect safety for the user.
1
1A
A
A
2
2A
Summary of Contents for Atlas Lite
Page 1: ...Invacare Atlas Lite User guide Yes you can I S O 9 0 0 1...
Page 28: ...26...
Page 29: ...27...
