Invacare® Modulite
5.5 Headrest/Neckrest
5.5.1 Replacing Rea Headrest
Removing Headrest
1.
Loosen hand screw
B
.
2.
Pull headrest
A
out of bracket
C
.
Fig. 5-2
Installing Headrest
1.
Install parts in reverse order.
2.
Tighten hand screw
B
hand-tight.
3.
Test all functions.
5.5.2 Replacing Rea Headrest Mounting Bracket (Sling Backrest)
•
4 mm Allen key
Removing Bracket
Not all bolts and washers are shown in illustration.
1.
Loosen and remove bolts
E
including washers
F
,
mounting plate
D
and bottom side of bracket
C
.
2.
Remove top side of bracket
B
including nuts
A
.
Fig. 5-3
Installing Bracket
1.
Install parts in reverse order.
2.
Test all functions.
5.5.3 Installing Elan Headrest to Flex3 Backrest
The Elan headrest can only be mounted to a Flex3 backrest via an adapter.
Risk of Damage to Property
After mounting parts of adapter, parts are difficult to separate again.
– Mount parts only within headrest housing.
– To dismount, use small Allen key or paperclip to disengage locking clips on inside while pulling parts apart.
– Mount parts completely to headrest mounting and ensure that parts engage with audible click.
•
Rubber mallet
•
Elan headrest adapter(s) for Modulite
22
1604311-G
