Maintenance
Components
Castors
•
Detach the castors and clean the castor forks.
•
Remove any dirt or hair from the castors.
•
Attach the castors again and check that the castors turn freely.
•
If the castors are air filled, check the pressure — recommended air pressure for low profile tires is
8” / 4.0 bar.
•
If the castors are solid, check the tires for cracks. If the tires are dry and filled with cracks, they
need to be replaced.
All fasteners for wear and
tightness
Bolts and other fasteners can come loose due to constant use:
1.
Check that the fasteners are tight on the castor forks, footrest, seat, side rests, backrest, handles etc.
2.
Tighten any loose bolts or screws.
Accessories
Lubricate all removable parts with a dry teflon based spray, e.g “Viso 900–B5”.
All fasteners for wear and
tightness
Bolts and other fasteners can come loose due to constant use:
1.
Check that the fasteners are tight on the castor forks, footrest, seat, side rests, backrest, handles etc.
2.
Tighten any loose bolts or screws.
Headrest
•
Check that the side- and angle adjustment for the “wings” works properly.
•
Check that the angle adjustment works and that there is a memory function.
Neckrest
•
Check that the angle adjustment works and that there is a memory function.
Trunk support “Multi
functional”
•
Check that the angle adjustment works properly and that there is a memory function.
Abduction cushion
•
Check that the depth adjustment works.
Table tray
•
When re-mounting the table tray, try to find the thread manually before fastening the screws with
tools. This spare the threading.
1580313-B
29
