Invacare Azalea Assist Service Manual Download

Page: 3 / 40

Contents

1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.2

Delivery check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.3

Customer service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2.1

Placing the wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.1.1

Wires with backrest plate . . . . . . . . . . . . . . . . . . . . . . 5

2.1.2

Wires with tension adjustable backrest . . . . . . . . . . . . 5

2.2

Mounting the angle adjustable push bar . . . . . . . . . . . . . . . 5

2.3

Mounting the Drip stand . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.4

Tilt scale backrest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.5

Tilt scale seat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.6

Mounting the attachment for table tray . . . . . . . . . . . . . . . 7

2.7

Mounting the sliding seat . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.8

Azalea Base seat attachment . . . . . . . . . . . . . . . . . . . . . . . 8

2.9

Mounting the table tray . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.10

Mounting the rear wheels . . . . . . . . . . . . . . . . . . . . . . . . 9

2.11

Mounting the legrest attachment for high position . . . . . . 9

2.12

Mounting the foot box . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.13

Mounting the drum brake . . . . . . . . . . . . . . . . . . . . . . . . 10

2.13.1

Drum brake for 16” wheels . . . . . . . . . . . . . . . . . . . . 10

2.13.2

Drum brake 22–24” wheels . . . . . . . . . . . . . . . . . . . . 11

2.14

Mounting the electrical tilt . . . . . . . . . . . . . . . . . . . . . . . 12

2.14.1

Mounting the battery. . . . . . . . . . . . . . . . . . . . . . . . . 12

2.14.2

Mounting the pistons. . . . . . . . . . . . . . . . . . . . . . . . . 13

2.14.3

Cable lock — piston . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.14.4

Mounting the control box . . . . . . . . . . . . . . . . . . . . . 14

2.14.5

Electrical schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.15

Mounting the chassis extender . . . . . . . . . . . . . . . . . . . . 16

2.16

Wash sealing kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3 Settings and Adjustments . . . . . . . . . . . . . . . . . . . . . . . . 17

3.1

Backrest plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3.1.1

Height adjustment backrest plate . . . . . . . . . . . . . . . . . 17

3.1.2

Width adjustment backrest plate . . . . . . . . . . . . . . . . . 17

3.2

Special adaptation of Flex 3 backrest . . . . . . . . . . . . . . . . . 17

3.3

Tension adjustable backrest . . . . . . . . . . . . . . . . . . . . . . . 18

3.3.1

Adjustment height — tension adjustable backrest . . . . . 18

3.3.2

Width adjustment — Tension adjustable backrest. . . . . 18

3.3.3

Angle adjustment — Tension adjustable backrest . . . . . 19

3.4

Positioning the headrest/neckrest to the front . . . . . . . . . . 19

3.5

Backrest for Azalea Max. . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.5.1

Adjustment backrest Azalea Max . . . . . . . . . . . . . . . . . 20

3.5.2

Azalea Max angle settings . . . . . . . . . . . . . . . . . . . . . . 21

3.6

Re-adjustment — armrest / legrest . . . . . . . . . . . . . . . . . . 22

3.7

Positioning the headrest/neckrest to the front . . . . . . . . . . 22

3.8

Width adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.9

Adjusting the width of the legrest . . . . . . . . . . . . . . . . . . . 23

3.10

Adjusting the user/foot operated tilt . . . . . . . . . . . . . . . . 23

3.11

Azalea Base — tilt and recline. . . . . . . . . . . . . . . . . . . . . 23

3.11.1

Backrest angle — rigging screw . . . . . . . . . . . . . . . . . 23

3.11.2

Backrest tilt — carer operated . . . . . . . . . . . . . . . . . 23

3.12

Foot box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3.13

Rear wheels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3.13.1

Adjustment rear wheels 16 inch . . . . . . . . . . . . . . . . . 24

3.13.2

Adjustment 22–24 inch wheels. . . . . . . . . . . . . . . . . . 25

3.14

Central legrest. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3.14.1

Adjusting the height of the central legrest . . . . . . . . . . 25

3.14.2

Adjusting the depth of the central legrest . . . . . . . . . . 25

3.14.3

Adjusting the angle of the central legrest . . . . . . . . . . 25

3.15

Adjusting the calf pads . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.16

Adjusting the brake effect . . . . . . . . . . . . . . . . . . . . . . . . 26

3.16.1

User brake — adjustment . . . . . . . . . . . . . . . . . . . . . 26

3.16.2

Drum brake — adjustments . . . . . . . . . . . . . . . . . . . 26

4 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.1

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.2

Maintenance electrical version — SM . . . . . . . . . . . . . . . . 27

4.3

Flat tire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.4

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.5

Washing and disinfection . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.5.1

Electrical version . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.6

Reconditioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

4.6.1

Checklist for reconditioning . . . . . . . . . . . . . . . . . . . . 30

5 After Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.1

Recycling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.2

Waste disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

6.1

Troubleshooting electrical system . . . . . . . . . . . . . . . . . . . 32

7 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

7.1

Dimensions and weights . . . . . . . . . . . . . . . . . . . . . . . . . . 33

7.2

Material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

7.3

Environmental conditions . . . . . . . . . . . . . . . . . . . . . . . . . 34

7.4

Electrical system — Azalea with electric tilt and

backrest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

7.5

Electromagnetic compliance (EMC) . . . . . . . . . . . . . . . . . . 34

7.6

Electromagnetic compliance (EMC) - Manufacturer´s

declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

7.7

Seat height tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

7.7.1

Rea® Azalea & Rea®Azalea Assist . . . . . . . . . . . . . . . . 35

7.7.2

Rea® Azalea max . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

7.7.3

Rea®Azalea equipped with Tall-kit . . . . . . . . . . . . . . . . 36

Summary of Contents for Azalea Assist









































Search results

Summary of Contents for Azalea Assist

Reviews:

Related manuals for Azalea Assist

Brands by name

Popular brands

Invacare Azalea Assist, Service Manual

Search results

Summary of Contents for Azalea Assist

Reviews:

Related manuals for Azalea Assist

Brands by name

Popular brands