Azalea®
3.
E
C
F
Mount the push bar
E
in the backrest tubes and tighten the
handwheels
C
.
WARNING!
Risk of injury
The push bar can loosen from the attachments
–
Make sure that the marking
F
on the tubes are
fitted against the backrest tube.
–
Check that the handwheels can be tightened
properly, the screw of the handwheel should
barely be visible. If the push bar is in the wrong
position, the handwheel will not be possible to
tighten properly.
4.
A
A
B
Re-mount the brake handles
B
and tighten the screws
A
.
Torx driver T20
2.3
Mounting the Drip stand
The rod of the drip stand must always be placed in a vertical
position, i.e in a 90 degree angle to the ground, no matter
the position of the backrest or the wheelchair.
90°
90°
1.
A
B
Mount the holder for the drip stand
A
on the neckrest holder
and tighten the screw
B
.
allen key 5 mm
2.
C
D
E
Mount the lever
C
, the washers
D
and the holder with the drip
stand
E
in the attachment and tighten the lever.
6
1580313-B
