Assembly
2.4
Tilt scale backrest
1.
A
B
C
Attach the clamps
A
with the tilt scale
C
to the push bar/push
handles or the backrest tubes and tighten the screws
B
.
2.
D
D
Place the end plugs
D
in the empty holes.
3.
E
F
Place the tilt scale for the backrest angle on the push bar/push
handle or on the backrest tubes according to picture
E
or
F
above.
2.5
Tilt scale seat
1.
A
B
Place the tilt scale for the seat
A
on the seat frame
B
.
The tilt scale should be placed on the left side.
2.6
Mounting the attachment for table tray
1.
A
B
Mount the table attachment
A
with the attachment part facing
outwards. The plain surface
B
of the attachment should be
placed upwards when using the table on the thin armrests.
2.
A
C
To fit the table attachment
A
to the wide armrest, turn the
attachment around, the patterned surface
C
should now be
facing upwards.
2.7
Mounting the sliding seat
WARNING!
Risk of injury
–
Be aware of the pinching risk when moving the sliding
seat back- and forwards.
1.
A
B
Loosen and remove the screws
A
and the seat plate
B
.
2.
C
C
D
Press the release handle
C
and push the sliding seat
D
backwards.
1580313-B
7
