Service
1.
Remove seat.
2.
Remove shroud.
3.
Disconnect battery cable.
4.
Place a supporting wooden block under the front part of
the frame so that the front wheel is no longer touching
the floor.
5.
Replace steering column. See
Replacing steering column
.
6.
Loosen 4 screws
A
on front shock absorbers.
7.
Loosen screws on cross members
B
on left and right
side.
8.
Loosen four screws
C
that fix cross members to frame.
9.
Loosen three screws
D
,
E
that fix two steering links.
10. Replace suspension.
11. Install parts in reverse order.
4.8.6 Replacing and Adjusting Central Rear Shock Absorber
•
17 mm wrench
•
15 mm wrench
•
Wooden block
•
45/50 hook wrench
•
Vise
To adjust central rear shock absorber to user weight,
Invacare recommends removing central rear shock
absorber.
Removing
Fig. 4-10
1.
Remove wheel (see user manual).
2.
Support rear swing arm with wooden block.
3.
Loosen and remove screws
A
that hold central shock
absorber: First loosen and remove lower screw, then
upper screw.
4.
Remove central rear shock absorber to the right side.
1603798-B
25
