5.5 Replacing Adjustable Tension Seat Upholstery
WARNING!
–
The seat upholstery and/or cushion MUST be cleaned
regularly and/or replaced if incontinence is frequent.
The risk of pressure sores is significantly higher with
seat upholstery that is wet and/or soiled.
1.
Remove the seat cushion and back upholstery from the
wheelchair.
2.
Place the wheelchair onto its two rear wheels and back canes.
3.
Unlatch the five adjusting straps
A
that secure the seat
upholstery
B
to the wheelchair frame
C
.
4.
Remove the existing seat upholstery
B
.
5.
Place the wheelchair back onto all four wheels.
Right and left is determined by sitting in the wheelchair.
The seat upholstery
B
MUST be positioned with the
three rear adjusting straps
A
towards the rear of the
top crossbar
C
for proper installation.
6.
Position new seat upholstery
B
onto the wheelchair frame
C
,
ensuring the five adjusting straps
A
hang over the right and left
sides of the wheelchair.
7.
Pull the front adjuster straps
A
around and under the wheelchair
frame top bars
C
.
8.
Slip front adjuster strap
A
through corresponding anchor loop
D
and adjust the seat upholstery
A
to desired tension. Secure
the adjustment straps.
9.
Place the wheelchair onto its two rear wheels and back cane.
10. Securely latch the four remaining adjuster straps
A
together.
11. Return wheelchair to upright position.
12. Reinstall the seat cushion and back upholstery.
1134872-D~08
63
Summary of Contents for Crossfire All Terrain
Page 17: ...Overview 3 Overview 3 1 Label Locations 1134872 D 08 17 ...
Page 87: ...Notes ...
