background image

Overbed Table

5 Usage

5.1 Using the Overbed Table

1.

To raise the table top, lift from anywhere on the underside of the table top to a desired height.

2.

To lower the table top, squeeze the release lever and push down on table to desired height.

6 Maintenance

6.1 Cleaning

Before using any cleaning products, test a small area on the corner of the table to make sure the cleaning product does not cause
discoloration or staining. DO NOT use an abrasive detergent or cleaner to clean the product.

Use water and a mild, non-abrasive cleaner to clean the overbed table.

6.2 Maintenance

The product is maintenance-free, provided the cleaning and safety instructions are followed at least every six (6) months. Check product regularly
for damage and to ensure that it is securely assembled.

Occasional application of light oil lubrication between the inner and outer columns will help keep the overbed table operating smoothly.

6.3 Disposal

When the product can no longer be used, the product, accessories and the packaging materials should be sorted correctly. Please be
environmentally responsible and recycle this product through your recycling facility at its end of life.

The disposal and recycling of used devices and packaging must comply with the applicable legal regulations.

6

1192682-A~01

Summary of Contents for IH1010









Reviews: