30
Repositioning The Upper Attachment
(FIGURE 3)
1. With the Telescoping I.V. rod in the lowest position,
align the hole of the outer tube with the phillips screw
of the inner tube. Remove phillips screw and set aside.
2. Remove the inner tube from the outer tube.
NOTE: Take note of the position and orientation of the
height adjustment assembly before removing. The height
adjustment assembly must be positioned to face away
from the wheelchair when installed.
3. Firmly grasp the height adjustment assembly and Pull
to remove from the outer tube.
4. Slide the upper attachment UP off of the outer tube.
5. Rotate the upper attatchment 180° and reinstall onto
the outer tube.
6. Reverse STEPS 1-4 to reassemble the telescoping
I.V. rod.
Outer Tube
Upper Attachment
(Shown rotated 180°)
Height Adjustment
Assembly
Hole
Phillips Screw
Inner Tube
Outer Tube
FIGURE 3- REPOSITIONING THE UPPER
MOUNTING BRACKET
OPTIONS
PROCEDURE 9
O
P
T
I
O
N
S
