Fig. 4-8 Example of DLX-REM400 adjustment. DLX-REM110,
DLX-REM211 and DLX-REM216 are adjusted the same way.
1.
Loosen screw
A
.
2.
Rotate remote in clamp to desired position.
3.
Tighten screw.
DLX-REM500
•
3/16 inch Allen key
Fig. 4-9
1.
Loosen screw
A
.
2.
Position display on nucleus.
3.
Tighten screw.
DLX-CR400 and DLX-CR400LF
Tilting Remote
•
4 mm Allen key
Fig. 4-10
1.
Loosen screws
A
.
2.
Position remote on nucleus.
3.
Tighten screws.
Rotating Remote
•
4 mm Allen key
•
8 mm wrench
Fig. 4-11
1.
Loosen screw
A
(not shown in picture).
2.
Rotate remote in clamp to desired position.
3.
Tighten screw.
ASL Components on Nucleus Tray
•
3/16 inch Allen key
1656515-B
17
