Invacare® Modulite
3.
Fig. 4-27
Adjust component to desired position.
4.
Tighten screws.
Make sure Nordlock washers used are re-inserted.
4.15 The hip support
The hip support can be combined with the flip-up armrest
only.
Removing hip support
1.
Pull lever
A
upwards.
2.
Remove hip support from holder.
Inserting hip support
1.
Insert hip support in holder.
2.
Push lever
A
downwards.
Ensure that hip support locks with an audible click.
Adjusting position of hip support
Risk of damage
If the hip support is adjusted too far to the back,
there is a risk of collision between hip support
and walking beam.
– Adjust hip support as far as possible to the
front.
– Check for collisions between hip support and
walking beam, especially when stepping down
obstacles.
24
1656515-B
