Invacare® Modulite
1.
Loosen screws
A
.
2.
Adjust component to desired position.
3.
Tighten screws.
4.22 Adjusting/Removing Tray
CAUTION!
Risk of injury or material damage if a mobility
device which is fitted with a tray is transported
in a vehicle
– If a tray is fitted, always remove it before
transporting the mobility device.
Fig. 4-44
4.22.1 Adjusting Tray Laterally
Fig. 4-45
1.
Loosen wing screw (1).
2.
Adjust component to desired position.
3.
Tighten wing screw.
4.22.2 Adjusting Depth of Tray/Removing Tray
Fig. 4-46
1.
Loosen wing screw
A
.
2.
Adjust component to desired position (or remove it
entirely).
3.
Tighten wing screw.
4.22.3 Swinging Tray Away to Side
The tray can be swivelled up and away to the side to allow
the user to get in and out of the mobility device.
CAUTION!
Risk of injury! When the tray is raised it does
not lock in place in this position!
– Do not tilt the tray up and leave it leaning in
this position.
– Never attempt to drive with the tray tilted up.
– Always lower the tray in a controlled manner.
40
1656515-B
