5.6 Using LNX powered center-mounted legrest
with telescoping footboard
Adjusting angle
WARNING!
Pinch point
Risk of pinching when adjusting legrest angle.
– Keep top of legrest clear when adjusting legrest
angle.
Lowering footboard
Risk of damage to floor
Lowering footboard until preset point could
damage floor.
– Stop lowering footboard when it touches the
floor.
You can lower the telescoping footboard until a preset
point. Depending on the wheelchair configuration, this point
might not exactly fit the seat-to-floor height but end a few
millimeters above or push a few millimeters into the floor.
Drive lockout
Risk of damage to wheelchair
Driving the wheelchair with lowered footboard
could damage the legrest.
– As soon as you move the footboard, a drive
lockout engages.
1.
To disengage drive lockout, retract footboard to top
position.
1656515-B
67
