Invacare® Modulite
6 Maintenance
6.1 Maintenance schedule
To ensure the optimal safety and reliability of your
power positioning system, adhere to the maintenance
schedule/table below. In addition to the maintenance
schedule, note the following maintenance tasks and safety
warnings that should be incorporated into your daily routine.
WARNING!
Any sudden or gradual deterioration in the
function/performance of your power positioning
system (i.e. increased actuator motor/gearbox
noise, rattling, sloppiness, etc.) must be
reported to your dealer immediately
– A complete wheelchair inspection by a qualified
technician is recommended to ensure there is
no unusual wear and tear, or physical damage
that requires servicing and/or repair.
To ensure your power positioning system is operating
properly and safely, Invacare recommends a complete
dealer inspection be performed on your power
positioning system every six (6) months by a qualified
technician.
Be certain to read and follow all maintenance
and safety information specific to your wheelchair
power base. Refer to your wheelchair’s user manual
(provided separately).
Daily maintenance:
•
Check that all switches (push buttons/toggles) that
operate your power positioning system are functioning
properly.
•
Charge batteries (refer to your wheelchair’s user
manual for important information on battery charging
and proper battery care).
Monthly inspection checklist:
•
Electrical / Wiring harnesses:
– Check for pinches or pulls in wiring (over full range
of seating system)
– Inspect for wear & tear damage to wires
– Ensure connections are secure
•
Hardware and components:
– Inspect mounting hardware (seating system to base)
•
Limit switches:
– Check limit switch settings
– Ensure DLO functions correctly
68
1656515-B
