3.
Adjust joystick orientation. If desired, lock joystick in 90
degree angle in slot.
4.
Tighten hand screw.
Adjusting Position on Holder
•
5/32 inch Allen key
Fig. 4-19
1.
Loosen screws
A
.
2.
Position joystick on holder.
3.
Tighten screws.
Adjusting Depth and Height
Refer to
Adjusting Swing-Away Mechanism
4.8.2 Adjusting Egg Switch
Adjusting Switch Orientation
The egg switch can be turned through 360 degrees.
•
7/16 inch wrench
Fig. 4-20
1.
Loosen nut
A
.
2.
Adjust egg switch orientation.
3.
Tighten nut.
Adjusting Depth and Height
Refer to
Adjusting Swing-Away Mechanism
.
4.9 Adjusting Head Array
Adjusting Pad Position
•
5/32 inch Allen key
Fig. 4-21
1.
Loosen screw
A
.
2.
Adjust pad position.
3.
Tighten screw.
1656515-B
21
