Components and their functions
Pull wheel lock
1.
To apply the wheel lock, pull the wheel lock lever
backwards as far as possible.
2.
To release the wheel lock, push the wheel lock lever
forwards.
The lever of the push handle can be folded back to
facilitate transfers. To do so, pull up the lever and
fold it backwards.
3.3 Backrest
Backrest cover
You can adjust the tension of the backrest cover as required.
Adjusting the backrest cover
1.
Remove the backrest cushion
A
.
2.
Loosen the Velcro® tapes
B
on the rear of the backrest
cover by simply pulling on them.
3.
Tighten or loosen the tapes as required then reattach
them.
WARNING!
Risk of tipping
If the bands are set very loose, the tipping point
of your wheelchair is changed for the worse.
– Ensure that the bands are set correctly.
IMPORTANT!
– Do not overtighten the bands; this is to ensure
that the geometry of the wheelchair is not
changed.
1587473-B
19
