Components and their functions
Angle adjustment
There are seven preset positions available for angle
adjustment.
1.
Rotate the knob
D
with one hand while supporting the
leg rest with your other hand.
2.
When a suitable angle is obtained, let go off the knob
and the leg rest will lock into the desired position.
Calf pad adjustment
The calf pad
E
swings away during transfers and has three
height adjustment options.
Height adjustment:
1.
After loosening the fixing screw
C
adjust to the desired
height and firmly tighten the fixing screw.
The calf pad has two depth adjustment options.
Depth adjustment:
Invacare recommends that depth adjustment is carried out
by an authorized dealer.
Foot plate adjustment
There are two different foot plates available.
•
Height adjustable foot plates
1.
After loosening the fixing screw
B
with 5 mm
Allen key.
2.
Adjust the height and tighten the fixing screw
B
(5 Nm) into the desired position.
•
Height, depth and angle adjustable foot plates
1.
After loosening the fixing screw
F
with 5 mm
Allen key.
2.
Adjust the depth and angle positions and firmly
tighten the fixing screw
F
(12 Nm) into the desired
position.
Invacare recommends that footplate adjustment is carried
out by an authorized dealer.
To ensure a good position of the feet, two types
of straps can be provided; the heel strap (serial)
and the calf strap (optional) attached to the leg rest
support. Both adjustable by Velcro® fasteners.
3.9 Anti-tipper
An anti-tipper prevents the wheelchair from tipping
backwards.
WARNING!
Risk of overturning
Anti-tippers that are incorrectly set or no longer
working can lead to overturning.
– Always check that the anti-tipper is working
before using the wheelchair and have it set
or readjusted by an authorized dealer when
required.
– In some configurations, the static stability of
the wheelchair may be lower than 10°; Invacare
strongly recommends the use of anti-tipper
(available as an option).
1587473-B
27
