Invacare® MyOn® HC
5.
Push the axle into the adapter sleeve
B
up to the stop.
6.
Release the removable axle button and make sure that
the wheel is secure.
7.5 Transporting the unoccupied wheelchair in
a vehicle
Even when the wheelchair is properly secured and the
following rules are met, injuries to passengers may occur
in a collision or sudden stop. Do not make alterations or
substitutions to points of the wheelchair (structure, frame or
parts) without the written consent of Invacare Corporation.
Only use the wheelchair transport brackets included with
TRBKTS for the purposes described in this manual.
To transport the unoccupied wheelchair in a vehicle, a
restraint system must be installed in the vehicle. Contact
your local Invacare authorized dealer for more information
on getting and installing an approved and compatible
restraint system.
TRBKTS includes four factory-installed wheelchair
transport brackets. TRBKTS has not been crash-tested
in accordance with ISO 7176–19. Invacare
recommends that these wheelchair transport
brackets be used only to secure an unoccupied
wheelchair during transport (See label
C
on left-side
of lower frame tube, refer to Positions for restraint
system hooks figure).
WARNING!
– Before journey contact transporter and request
information about the capability for the below
required equipment.
– Make sure there is sufficient free space around
the wheelchair to avoid making contact with
other vehicle occupants, unpadded parts of
the vehicle, wheelchair accessories or anchor
points of the restraint system.
WARNING!
– Ensure quick-release pins are engaged through
bearing housings and tilt slides.
– Make sure the transport brackets (TRBKTS) at
the wheelchair are not damaged and that the
wheel locks are fully functional.
WARNING!
Injury or damage may occur from wheelchair
components or accessories loosened during a
collision or sudden stop.
– Ensure all removable or detachable
components and accessories are removed from
the wheelchair and securely stored in the
vehicle.
46
1587473-B
