d) Check joystick lead and plug ends for signs of cracks, wear or
physical damage.
e) Check, status LED on side of controller is on (Stable).
f) Check diagnostics. To assure no faults present on systems. (Check On /
Off lamp status, if flashing refer to diagnostics supplement on page 23/24
3.
Chassis:
a) Inspect all fixtures and fittings for tightness and integrity.
b) Check front and rear wheel/axle bolts are tight.
c) Ensure that all upholstery screws are present and tight. Check surface of
screw head for sharp edges.
Servicing Requirements
4.
Batteries:
a) Check batteries for any signs of physical damage.
b) Check terminals for cracks or blackness.
NOTE:
SHOULD BATTERIES BE SUSPECT USE BATTERY DISCHARGE
TESTER, BY ASTRA- TECH, (MODEL DC39) TO TEST CAPACITY AND
RUN TIME.
Battery Charger:
a) Check for physical damage of casing.
b) Check all LED’s are operational.
c) For testing the battery charger, see page 10 section Batteries and charger.
25
Phoenix
11/01
