SECTION 5—ARMS
Pronto® Series
48
Part No. 1125075
Adjusting the Flip Back Armrest Height
WARNING
Make sure the flip back armrest release levers and height adjustment levers are in
the locked position before using the wheelchair.
NOTE: For this procedure, refer to FIGURE 5.5.
1. Unlock top of flip back armrest by pulling height adjustment lever into the up
(horizontal) position.
2. Adjust top of the flip back armrest to the desired height.
3. Lock top of flip back armrest by pushing height adjustment lever into the down
(vertical) position.
4. Lift up on flip back armrest to make sure the armrest is locked in place.
5. Repeat STEPS 1-4
for opposite flip back armrest, if necessary.
FIGURE 5.5
Adjusting the Flip Back Armrest Height
Locked
(Down - Vertical)
Unlocked
(Up - Horizontal)
Height
Adjustment
Lever
Flip Back
Armrest
Front Arm Socket
Flip Back Armrest
Release Lever
