SECTION 6—ARMS
Pronto
®
M94
™
38
Part No. 1122145
ADJUSTING
1. Unlock top of flip back armrest by pulling height adjustment lever into the UP
(HORIZONTAL) position.
2. Adjust top of the flip back armrest to the desired height.
3. Lock top of flip back armrest by pushing height adjustment lever into the DOWN
(VERTICAL) position.
4. Lift UP on flip back armrest to make sure the armrest is locked in place.
5. Repeat STEPS 1-4
for opposite flip back armrest, if necessary.
ADJUSTING VAN SEAT ARMRESTS
ANGLE
NOTE: For this procedure, refer to Detail “A” of FIGURE 6.3.
1. Lift UP the armrest.
2. Loosen the jam nut.
3. Adjust the socket screw UP or DOWN to the desired arm angle position.
4. Tighten the jam nut.
5. To determine the same angle for the opposite armrest, count the exposed threads after
the jam nut has been tightened.
6. Repeat STEPS 1-4 for opposite armrest, if necessary.
HEIGHT
NOTE: For this procedure, refer to Detail “B” of FIGURE 6.3.
1. Remove the socket screw that secures the armrest to the seat frame assembly.
2. Adjust the armrest to one (1) of four (4) positions.
3. Reinstall the socket screw that secures the armrest to the seat frame assembly and
tighten securely.
FIGURE 6.3 - ADJUSTING VAN SEAT ARMRESTS
DETAIL “B” - HEIGHT
DETAIL “A” - ANGLE
Armrest
Adjustment
Screw
Armrest
Height
Adjustment
Holes
Seat Frame
Assembly
Lock Knob
Jam
Nut
