background image

GENERAL GUIDELINES    

 

 

 

 

 

 

 

 

 

       

STAIRWAYS 

WARNING 

 

 

DO NOT attempt to lift the wheelchair by any removable (detachable) parts.  Lifting by means of 
any removable (detachable) parts of a wheelchair may result in injury to the user or damage to 
the wheelchair. 

 

 

Follow this procedure for moving the wheelchair between floors when an elevator is NOT 
available: 

 

WARNING 

 

 

The weight of the wheelchair without the user and batteries is between 30 and 40 kgs.  Use 
proper lifting techniques (lift with your legs) to avoid injury. 

 

 

 

ESCALATORS? SORRY! 

 

 

DO NOT use an escalator to move a wheelchair between floors.  Serious bodily injury may occur. 

 

 

TRANSFERRING TO AND FROM OTHER SEATS 

WARNING 

 

 

ALWAYS turn the wheelchair power OFF and engage the clutches to prevent the wheels from 
moving BEFORE attempting to transfer in or out of the wheelchair.  Also make sure every 
precaution is taken to reduce the gap distance by turning both casters parallel to the object you 
are transferring onto. 

 

CAUTION 

When transferring, position yourself as far back as possible in the seat.  This will prevent broken 
screws, damaged upholstery and the possibility of the wheelchair tipping forward. 

 

 

 

23

1. 

Remove the occupant from the wheelchair.  

2. 

Remove the battery boxes from the wheelchair 
(refer to owners manual). 

3. 

If necessary fold the wheelchair.  Refer to the 
owners manual. 

4. 

Bend your knees and keep your back straight. 

5. Using 

non-removable 

(non-detachable) parts of 

the wheelchair, lift the wheelchair off of the 
ground and transfer the wheelchair up or down 
the stairs. 

6. 

The wheelchair should not be lowered until the 
last stair has been negotiated and the wheelchair 
has been carried away from the stairway.

Summary of Contents for PT2000































Reviews: