REA® ASSIST
20
A
1.
2.
3.
A
19 cm
1.
Brake when the wheelchair is moving: squeeze
both brake handles upwards and the brake will
be applied.
2.
Lock the brakes: squeeze the handle upwards and
move the lock catch (A) upwards. Then release
the handle.
3.
Release the brakes: squeeze the handle upwards
and the lock catch will release automatically.
Incorrect setting or use of the brakes will
reduce the braking effect.
CARER-OPERATED BRAKES
Loosen the knobs (A). The height of the push-
handles braced/pushbar can be adjusted simply
by pulling the handles upwards or pushing them
downwards. Adjust it to the height that you require
and tighten it.
It is important that you
do not mix up the
upper and lower
knobs
on the back of the
backrest. The lower knobs lock the backrest
to the chair, and if these are loosened by mis-
take, the safety of the chair may be jeopard-
ised!
The pushhandles braced/pushbar must not be
pulled up so that it protrudes more than 19
cm over the top edge of the attacthment.
Do not trap your fi ngers between the push
handles brace and the neckrest attachment. (If
you have tension adjustable.)
Do not touch these knobs!
PUSH HANDLES BRACED/PUSHBAR
Summary of Contents for Rea Assist
Page 1: ...Rea Assist Manual English...
