11
REA BELLIS
C
A
B
B
E
C
D
A
You adjust the height of the central support (A), by
loosening handwheel (B), adjusting to the desired
height and retightening. The angle and height of the
neck rest are adjusted by loosening the levers (C).
Change to the desired position and retighten the
handwheels.
The central support (A) must not remain
on the chair if the neck rest is removed.
Neckrest/headrest
ADJUSTABLE HEADREST/NECKREST
To adjust the neckrest/headrest sideways loosen the
knob/screw (A). Adjust to a new position and tighten
the knob/screw (A). Adjust the angle and height by
loosen the handles (B). Change to a new position and
tighten the handles (B).
To get maximum sideway movement you can turn
around the attachment (C). The knob/screw (A)
shout sit on the left side of the attachment to get
maximum sideway movement to the left and on the
right side of the attachment to get maximum sideway
movement to the right.
Take away the attachment (C) by loosen the screws
(E) and the screw (D), take out the attachment and
turn around to required position. Re-tighten the
screws (E) and the screw (D).
If the neckrest/headrest has been taken away,
The centre rod mustn't be left on the
chair.
Summary of Contents for rea Bellis
Page 1: ...Rea Bellis assembly instructions accessories English...
Page 2: ...2 REA BELLIS...
Page 23: ......
