17
REA BELLIS
A
B
4.
1.
2.
Central legrest
1.
If you want to fi t a central legrest to the wheelchair,
you must fi rst remove the existing seat extension.
Use an Allen key to loosen both screws (A). Then
fi t the central legrest, set the required seat depth
and tighten the screws (A).
2.
Adjust the legrest to a central position by
loosening both Allen screws (B) as shown in
the picture. When you have found the desired
position, retighten the screws.
4.
The Laguna pad has Velcro strips on the back of
its cover and is inserted into the plastic shell
casing in the place where the standard pad is
otherwise fi tted. The pad’s cover can be removed
and washed according to the washing instructions.
Remove the cover by unzipping it and pulling
it off the pad.
Summary of Contents for rea Bellis
Page 1: ...Rea Bellis assembly instructions accessories English...
Page 2: ...2 REA BELLIS...
Page 23: ......
