Rea® Clematis®
1.
Insert the tube of the half tray
A
into the attachment
B
under the arm pad.
D
C
2.
Push on the push pin
C
and insert the ring
D
on the
tube
A
.
3.
Release the push pin
C
.
5.3.2 Adjusting the half tray
A
1.
Slide the half tray
A
forwards or backwards to adjust to
the required depth.
CAUTION!
Risk of discomfort
– When adjusting the depth of the half tray,
make sure not to squeeze the stomach of
the user.
5.3.3 Add a half tray cushion
A cushion for the half tray can be placed on the half tray in
order to have a softer surface for the arms and elbows.
A
B
1.
Place the cushion for the half tray
A
on the tray.
2.
Place the attachment straps
B
into the plastic buckle
and around the half tray
A
.
5.4 Headrest / Neckrest
5.4.1 Height adjustment
A
B
A
B
The height and the removal are operated by the
handwheel. The bar is equipped with an adjustable
stop block.
1.
Loosen the screw in the stop block
B
.
2.
Loosen the handwheel
A
.
3.
Adjust the head rest to the desired position.
4.
Re-tighten the handwheel
A
.
5.
Slide the stop block
B
down to the top of the headrest
attachment.
6.
Re-tighten the screw.
It is now possible to remove the headrest and
reinsert it in the desired position without further
adjustments.
5.4.2 Depth / angle adjustment
C
D
C
D
1.
Loosen the handle
D
.
2.
Loosen the screws
C
.
3.
Adjust the depth and angle of the headrest.
4.
Re-tighten the handle and the screws.
5.5 Trunk support “swing-away”
A
C
B
16
1439960-D