26
1-2.
A
B
Anti-tippers traditional
The anti-tip device is also used as a step tube. It is
easy to adjust the height.
1.
Remove the plastic plugs from both the step tubes/
back frame parts. Push the anti-tip device into place
and screw tightly with the nut (A) and screw (B).
2.
Pull the spring-loaded plastic washer back and slide
the anti-tip device to the desired position. Make
sure that the anti-tip device is secure in the new
position.
Always remember to activate the anti-tippers
again when you have had them deactivated.
Tool: 4 mm Allen key
10 mm socket spanner
C
Ultra low anti-tippers for seat height 36 cm
1. Remove the plastic plugs from the back frame
parts. Push button (C) and insert the anti-tipper.
Make sure the button (C) pops out into the hole
in the frame.
2. The anti-tippers can be de-activated by pushing
button (C) and turning the anti-tippers 180° so
that the anti-tipper wheel is pointing upwards.
Make sure that the button (C) pops out under-
neath.
Always remember to activate the anti-tippers
again when you have had them deactivated.
Summary of Contents for Rea Spirea4 NG
Page 1: ...4 R pirea User Manual English...
Page 39: ...39...
