27
A
B
1.
1.
2.
A
1.
Attach the leg rests by pushing the pin at the upper
part of the leg rests down into the tubes on the
wheelchair. You must angle the leg rests outwards
when you insert them. By twisting the leg rests
this way they will lock and there will be no risk of
them coming off the wheelchair.
2.
Loosen the screw (A) on the cushion’s mounting
to adjust the cushion’s angle and depth. Loosen
the screws (B) to adjust the height.
When using the amputee leg rest, the balance
of the wheelchair changes. The risk is minimised
by moving the drive wheels backwards in the
drive wheel attachment and by using the passive
or double amputee drive wheel attachments.
See chapter on Drive wheel settings.
AMPUTEE LEG REST
Tool: 5 mm Allen key
Adjusting the push handles
1.
If your wheelchair has push handles that can be
raised and lowered you can easily change the height
by loosening the knob, setting it to the desired
height and tightening the knob.
2.
When the hole (A) is visible, at the top edge of
the attachment, the handle will be in the correct
”lock position”.
PUSH HANDLES
Summary of Contents for Rea Spirea4 NG
Page 1: ...4 R pirea User Manual English...
Page 39: ...39...
