Invacare Rea Spirea4 NG User Manual Download

Page: 40 / 40

Invacare Rea AB

Växjövägen 303 S-343 71 DIÖ SWEDEN

Belgium & Luxemburg:

Invacare nv, Autobaan 22, B-8210 Loppem

Tel: (32) (0)50 83 10 10, Fax: (32) (0)50 83 10 11

belgium@invacare.com / www.invacare.be

Danmark:

Invacare A/S, Sdr. Ringvej 37, DK-2605 Brøndby

Tel: (45) (0)36 90 00 00, Fax: (45) (0)36 90 00 01

denmark@invacare.com / www.invacare.dk

Deutschland:

Invacare Aquatec GmbH, Alemannenstraße 10,

D-88316 Isny

Tel: (49) (0)75 62 7 00 0, Fax: (49) (0)75 62 7 00 66

info@invacare-aquatec.com / www.invacare-aquatec.de

Ulrich Alber GmbH, Vor dem Weissen Stein 21,

D-72461 Albstadt-Tailfingen

Tel: (49) (0)7432 2006 0, Fax: (49) (0)7432 2006 299

info@ulrich-alber.de

European Distributor Organisation:

Invacare, Kleiststraße 49, D-32457 Porta Westfalica

Tel: (49) (0)57 31 754 540, Fax: (49) (0)57 31 754 541

edo@invacare.com / www.invacare.eu.com

España:

Invacare SA, c/Areny s/n, Polígon Industrial de Celrà,

E-17460 Celrà (Girona)

Tel: (34) (0)972 49 32 00, Fax: (34) (0)972 49 32 20

contactsp@invacare.com / www.invacare.es

France:

Invacare Poirier SAS, Route de St Roch,

F-37230 Fondettes

Tel: (33) (0)2 47 62 64 66, Fax: (33) (0)2 47 42 12 24

contactfr@invacare.com / www.invacare.fr

Ireland:

Invacare Ireland Ltd, Unit 5 Seatown Business Campus,

Seatown Road, Swords, County Dublin - Ireland

Tel: (353) 1 810 7084, Fax: (353) 1 810 7085

ireland@invacare.com / www.invacare.ie

Italia:

Invacare Mecc San s.r.l., Via dei Pini 62,

I-36016 Thiene (VI)

Tel: (39) 0445 38 00 59, Fax: (39) 0445 38 00 34

italia@invacare.com / www.invacare.it

Nederland:

Invacare BV, Celsiusstraat 46, NL-6716 BZ Ede

Tel: (31) (0)318 695 757, Fax: (31) (0)318 695 758

nederland@invacare.com / www.invacare.nl

csede@invacare.com

Norge:

Invacare AS, Grensesvingen 9, Postboks 6230,

Etterstad, N-0603 Oslo

Tel: (47) (0)22 57 95 00, Fax: (47) (0)22 57 95 01

norway@invacare.com / www.invacare.no

island@invacare.com

Österreich:

Invacare Austria GmbH, Herzog Odilostrasse 101,

A-5310 Mondsee

Tel: (43) 6232 5535 0, Fax: (43) 6232 5535 4

info@invacare-austria.com / www. invacare.at

Portugal:

Invacare Lda, Rua Estrada Velha, 949,

P-4465-784 Leça do Balio

Tel: (351) (0)225 1059 46/47, Fax: (351) (0)225 1057 39

portugal@invacare.com / www.invacare.pt

Sverige & Suomi

Invacare AB, Fagerstagatan 9, S-163 91 Spånga

Tel: (46) (0)8 761 70 90, Fax: (46) (0)8 761 81 08

sweden@invacare.com / www.invacare.se

finland@invacare.com

Switzerland:

Invacare AG, Benkenstrasse 260, CH-4108 Witterswil

Tel: (41) (0)61 487 70 80, Fax: (41) (0)61 487 70 81

switzerland@invacare.com / www.invacare.ch

United Kingdom:

Invacare Limited, Pencoed Technology Park, Pencoed,

Bridgend CF35 5HZ

Switchboard Tel: (44) (0)1656 776200, Fax: (44) (0)1656

776201

Customer services Tel: (44) (0)1656 776222, Fax: (44)

(0)1656 776220

UK@invacare.com / www.invacare.co.uk

Art. No. 1536533-4 2013-08

Sales Companies:

Manufacturer:

Summary of Contents for Rea Spirea4 NG









































Search results

Summary of Contents for Rea Spirea4 NG

Reviews:

Related manuals for Rea Spirea4 NG

Brands by name

Popular brands

Invacare Rea Spirea4 NG, User Manual

Search results

Summary of Contents for Rea Spirea4 NG

Reviews:

Related manuals for Rea Spirea4 NG

Brands by name

Popular brands