SECTION 2—ASSEMBLY
Part No 1141431
13
Reliant™ 440
Attaching the Kneepad
WARNING
The kneepad is an integral part of the lift and MUST be attached so that the lift can
function correctly and safely.
CAUTION
When connecting the actuator to the boom, DO NOT over-tighten the bolt
because this will deform the clevis and restrict the pivot.
NOTE:
For
this
procedure,
refer
to
FIGURE 2.2
on
page 13.
1. Connect
the
top
of
the
actuator
to
the
boom
using
the
bolt
provided
(Detail
“A”).
2. Insert
the
two
posts
of
the
kneepad
into
the
tube
retainers
of
the
kneepad
receiver
while
turning
the
kneepad
release
lever
in
a
clockwise
direction
(Detail
“B”).
3. Release
the
kneepad
release
lever.
4. Slide
the
kneepad
in
or
out
until
it
is
locked
into
position.
FIGURE 2.2
Attaching the Kneepad
Actuator
Bolt
Boom
DETAIL “B”
DETAIL “A”
Post
Post
Kneepad
Kneepad
Receiver
Kneepad
Release
Lever
Tube
Retainer
Tube
Retainer
