background image

Invacare® REM 550

4.

You can set the drive levels using the drive mode key

C

. In this

case, drive level 1 is the slowest and drive level 5 the fastest
setting.

5.

Within each drive level you can carry out fine settings for the
speed using the function key

B

. The fine settings are displayed

in the ring

D

. This enables, for example, adapting the speed to

that of an attendant.

Remotes since July 2014

1.

Press the "ON/OFF" key.

2.

The display illuminates.

3.

The mode display

A

shows the drive level (see drive limit status

below).
The wheelchair is ready to drive.

4.

You can set the drive levels using the drive mode key

D

. In this

case, drive level 1 is the slowest and drive level 5 the fastest
setting. In the example above, drive level 4 is for a medium-fast
setting. The orange marker

B

indicates the maximum speed

for each drive level.

5.

Within each drive level you can carry out fine settings for the
speed using the function key

C

. The fine settings are displayed

in the ring

E

. This enables, for example, adapting the speed to

that of an attendant.

The drive limit status (remotes since July 2014)

The color of the current drive profile, shown in the middle of the
screen, is dependent on the wheelchair’s status.

green

Normal drive operation.

orange

Wheelchair can drive or is driving in a
restricted capacity (that is, reduced speed).

red

Inhibited state (flashing) – the chair cannot be
driven in this state.

The G-Trac™ option

If your mobility device has been fitted with the G-Trac
option you will NOT be able to change driving profiles while
travelling.

If your mobility device has been fitted with the G-Trac option, it will
enable you to enjoy fatigue-free and safer driving.

G-Trac supports you in staying at the same driving speed and
travel direction, and therefore reduces fatigue.

It improves the tracking and therefore increases the user's
driving comfort.

G-Trac stabilizes the mobility device tracking in the case of
front-wheel-drive devices and finds the optimum driving speed
for travelling round bends. This prevents skidding, slipping or
tipping of the mobility device and therefore increases safety.

10

1528090-G

Summary of Contents for REM 550

























Reviews: