Invacare® REM 550
3.9.5
Changing the screen background (remotes up
to July 2014)
The automatic screen background setting is standard on
delivery. When the lighting is switched on, the background
will change from white to black.
The symbol for screen background (see chapter 3.10.1 Deactivating
programming mode (remotes since July 2014), page 18) is shown
in the display.
1.
Press the function key
B
or move the joystick right or left to
select one of the three modes.
2.
Select the screen background by selecting one of the following:
•
Select (1) if you want to have a black screen background.
•
Select (2) if you want to have a white screen background.
•
Select (3) if you want the screen background to be set to
standard.
3.
Press the "Activate setting mode" key
A
or move the joystick
forwards to save the change.
4.
To carry out further settings, press the "Activate setting mode"
key
A
or move the joystick right or left again.
5.
To return to drive mode, press the "Activate drive
mode/switch-through" key
C
.
3.10
Further adjustment options for remotes
since July 2014
3.10.1
Deactivating programming mode (remotes
since July 2014)
The setting options described here are standard settings. The
functions of the buttons can be allocated differently, specific to the
customer, or can be deactivated.
1.
Press the "Activate setting mode" key
A
until the cog
C
is
displayed, and then move the joystick forward, momentarily, to
enter the settings menu.
2.
Press the function key
B
or move the joystick right or left until
the required adjustment option is shown in the display.
3.
Press the joystick forward to confirm the required adjustment
option.
You can change the following settings:
18
1528090-G
