Usage
3 Usage
3.1
Using the chin control with the remote
You can use the remote together with a chin control. For details,
refer to the Chin Control user manual.
3.2
Using Buddy Buttons with the remote
What is a Buddy Button?
–
A Buddy Button (4) is an additional button which can
be used to activate remote functions. The sockets for
Buddy Buttons are located underneath the remote.
1)
Socket I
(corresponds to "Activate drive mode/switch-through" key)
The button is deactivated as standard.
2)
ON/OFF socket
(corresponds to "ON/OFF" key)
3)
Socket II
(corresponds to "Activate setting mode" key)
The button is deactivated as standard.
4)
Buddy Button
The cover cap must be removed if sockets 1 to 3 are to be
used. To do this, remove the Phillips screw.
3.3
Steering the wheelchair with the remote
The necessary force to operate the joystick and input
buttons is less than 13.5 N. This complies with the
requirements of ISO 7176-14.
Remotes up to July 2014
1.
Press the "ON/OFF" key.
2.
The display illuminates.
3.
The mode display
A
shows the drive level.
The wheelchair is ready to drive.
1528090-G
9
