16
60129676-A
Invacare
®
Softform Active
®
2 Rx
4.9 Replacing the Power Switch
R
efers to spare parts kit SP1633123
Risk of damaging the PCB by electro-
static discharge
Handle PCB's only in Electrostatic Protected
Areas
PH1 Phillips key
1. Switch off the control unit and disconnect from
mains supply.
2. Remove the bottom housing
3. Unplug the red
A,
green
B
and two black
C
wires
from the defective power switch. Discard it.
Risk of malfunction or damage to the
Control Unit
Ensure the red
A,
green
B
and two black
C
wires are plugged back into their original
positions.
4. Plug the red
A,
green
B
and two black
C
wires
back to their original positions on the new power
switch.
5. Slide the switch into the slit.
6. Reinstall the bottom housing.
A
B
C
Fig. 4-29
