Part No 1076166
3
Spartan and Sprint Rollators
Folding
1. Grasp cutout in seat and pull up.
FIGURE 2
Opening/Folding Rollator - Model 65420
Installing/Adjusting Push Handles
Installing
1. Turn adjustment levers counterclockwise.
2. Insert push handles into side frames with the hand grip facing the back of the
rollator.
3. Adjust the push handles. Refer to Adjusting on page 3
of this instruction sheet.
Adjusting
1. If necessary, loosen adjustment lever.
2. Position the push handle so that when the user’s arm is down to their side, the
hand grip is at wrist height.
3. Ensure that the push handle is adjusted ONLY where the tubing is textured.
4. Securely tighten push handle by turning adjustment lever clockwise.
5. Repeat STEPS 1 - 3 for remaining push handle.
6. Do one (1) of the following:
• If necessary, install the basket.
Refer to Installing Basket -
Model 65420 Only on page 4 of
this instruction sheet.
• If necessary, install the tray.
Refer to Installing the Tray -
Model 65420 Only on page 4 of
this instruction sheet.
• Before using the rollator, refer to
Using Hand Brakes on page 5 of
this instruction sheet.
FIGURE 3
Installing/Adjusting Push
Handles
Cutout
Seat
NOTE: Shipping Tube
NOT shown for clarity.
Side Frame
Adjustment Lever
Push
Handles
Hand Grip
Textured Tubing
FRONT
BACK
