To select the appropriate sling, a risk assessment must be
performed by a healthcare professional. The risk assessment
must consider:
•
The patient’s weight, size, physical ability and medical
condition.
•
The type of transfer and the environment.
•
The compatibility to the other lifting equipment used.
For more information see the
Invacare Sling Selection
Guide
4.2 Applying the Sling
Application of Stand Assist Sling
1.
Lean the patient forward ensuring that he is well
supported to reduce the risk of falling.
2.
Slide the sling down behind the back of the patient in
a central position until the lower edge of the sling is
aligned with the upper edge of the pelvis.
Fig. 2a
3.
Lean the patient back against the sling.
4.
Close the belt around the patients chest and make sure
that it is well adjusted to the patient.
Fig. 2b
Application of Transfer Stand Assist Sling
1.
Lean the patient forward ensuring that he is well
supported to reduce the risk of falling.
2.
Slide the sling down behind the back of the patient in
a central position until the lower edge of the sling is
aligned with the upper edge of the pelvis.
Fig. 3a
3.
Lean the patient back against the sling.
4.
Pull the leg support forward along the outside of the
thigh on each side.
5.
Pass each leg support under the corresponding thigh.
Fig. 3b
6.
Close the belt around the patients chest and make sure
that it is well adjusted to the patient.
Positioning of Patient Arms
The arms of the patient must be placed outside the sling
4.3 Sling Attachment to the Lift
Stand Assist Sling
The suspension straps of the sling are equipped with color
coded loops providing different lengths to place the patient
into different positions. Shorter straps will produce a more
vertical lift and by lengthening the straps a more reclined
position can be achieved. Match the loop colors of the straps
on each side of the sling for an even lift of the patient.
Fig. 4a
1.
Attach the desired loop of each strap to the
corresponding hook on the lifting arm (upper hooks).
Fig. 4b
Transfer Stand Assist Sling
The suspension straps of the sling are equipped with color
coded loops providing different lengths to place the patient
into different positions. Shorter straps at the shoulders will
produce a more vertical lift and by lengthening the straps at
the shoulders, a more reclined position can be achieved.
The correct length of the leg straps depends on patient
morphology and preference. Match the loop colors of the
corresponding straps on each side of the sling for an even
lift of the patient.
Fig. 5a
1.
Attach the desired loop of each shoulder strap to the
corresponding hook on the lifting arm (upper hooks).
Fig. 5b
2.
Attach the desired loop of each leg strap to the
corresponding lower hook.
Fig. 5b
The exact location of the hook and the availability of
lower hooks depends on the lift in use.
4.4 Removing the Sling
1.
After completion of the transfer, detach the sling from
the lift.
2.
Reverse the procedure described in
5 Maintenance
5.1 Inspection
Daily Inspection Before Use
Inspection to be performed daily, before use and after each
laundering:
•
Visually inspect the sling and check all parts for signs of
damage, wear or potential failure.
Periodic Inspection
IMPORTANT!
Inspections must be performed by a qualified
person who is well acquainted with the design,
use and care of slings.
A periodic safety inspection of the sling must be performed
at least every 6 months unless otherwise stated in local
requirements.
A detailed safety inspection checklist is available from
Invacare as a separate document.
LOLER Statement
The UK Health and Safety Executive’s Lifting Operations and
Lifting Equipment Regulations 1998, require any equipment
that is used in the workplace to lift a load be subject to
safety inspection on a six monthly basis. Please refer to the
HSE web site for guidance www.hse.gov.uk.
The person responsible for the equipment must ensure
adherence to LOLER regulations.
5.2 Cleaning and Disinfection
WARNING!
Risk of injury
Usage of damaged slings can cause the patient to
fall or cause injury to assistants.
– After each laundering, inspect the sling for
wear, tear, and loose stitching.
IMPORTANT!
Regular cleaning and disinfection prevents
contamination.
Clean and disinfect the product
– regularly while it is in use,
– when it has been in contact with any body
fluids,
– before using it for a new user.
IMPORTANT!
Always make sure that the product is completely
dried before taking it into use again.
Cleaning Instructions
Launder and dry the sling according to the washing
instructions on the label.
60124417-A
5
