11
Maintenance and service
Cleaning
•
DOLOMITE
STEP UP can be cleaned in a washing plant or by means of high pressure water. 60° C maxi-
mum.
•
Never use acids, bases or solvents to clean the product.
•
After washing, wipe the platform support dry.
•
Remove the motor, control unit and hand control before washing in a washing plant or by means of high
pressure water.
• Wipe the motor, control unit and hand control with a soft, dry cloth.
To maintain function and safety we recommend weekly checks that screws, nuts and bolts are tightened properly.
If not, re-tighten properly before the platform is used again.
If any other defects are discovered the platform cannot be used - contact your dealer immediately.
Do not carry out any changes yourself!
• The platform must not be permanently stored in an environment with a high atmospheric humidity!
Maintenance
Recycling
This product has been supplied from an environmentally-conscious supplier that fulfils the standards in the Waste
Electrical and Electronic Equipment (WEEE) Directive 2002/96/CE.
This product can contain substances that can damage the environment if they are not recycled in accordance
with national legislation.
The "crossed out dustbin" symbol is placed on this product to encourage recycling where possible.
Please be environmentally responsible and recycle this product through your local recycling station.
All electrical parts must be removed and recycled as electrical components. Steel and aluminium components
are recycled as scrap metal. Plastic parts shall be recycled or incinerated. Recycling of parts must always comply
with local or national laws.
DOLOMITE
STEP UP
DOLOMITE
STEP UP
